dealadaywake

Blemished boards: small scratches

• Aggressive 3 Stage Rocker
• Variable Edge, Softer Rail in The Middle, Progresses to a Crisp Rail at the Nose and Tail
• Concave Top Deck, Allow Easier Transition from Heel to Toe Edging
• Die Cut Jeesup Grip Tape
• Boards are Drilled for Use of Accessory Fins for Locking into Rails
• 2 Skate Fins Standard

The completely new Syn boot is built from the ground up to fit and function for ladies looking to take their riding to the next level. Starting with a ladies specific last, the new Syn has reduced internal volume and a lower cuff to accurately fit a women’s foot and calf. The dual Quick Cinch lace system also allows for fine tuning of boot tension between the upper and lower zones. All of these features are wrapped up on our new Low Pro plate system which puts the rider closer to the deck of the board for maximum feel and control.

Features:
- Low Pro plate system
- Women’s specific fit
- Dual Quick Cinch lace zones
- Option 2 strap
- Classic sneaker fit construction
- Articulating cuff
- Dual density pro footbed
- Flow through drain panels
- Removable claw ring

Whether you’re landing backside 7′s en route to another double up contest victory like Henny, or you’re spinning your first 3, this board is designed to give you a fun experience like none other.

• Aggressive, Three-Stage Rocker
  Straighter through center with exaggerated curve out the tips – quick transitions into the tail section for a straight up pop off the wakes.
• D-I-S-C hull through center
  Double-Inside-Single-Concave… Softens landings and maintains board speed.
• Quad Channel / Quad Fin
  Controlled water flow through ends for extra thrust and lift.
• Variable Edge Rail
• Quad Molded-in Warped Fin Setup
  Speed, hold, and projection out of turns and off the wake.

Ronix spent two seasons designing a compression molded bi-level wood wakeskate with the buoyancy of your favorite wood deck and the durability of that wakeboard you have had in the garage since ’97.  The bi-level shape of the Ronix Zariel wakeskate creates a consistent, quicker swing weight than a traditional single level skate.

• Material – Compression molded bi-level wood, Grip tap.
• Construction – Obese technology: Weighing in at 14+ lbs, the Zariel gives you more board control with it’s heavier weight. The concave shape starts in the center of the board and tapers out the ends for a more controllable flip.
• Base Features – Hybrid rocker: isn’t too explosive and inconsistent off the wake, instead more glide sleep from the arc.

• Progressive, 3 Stage Rocker – Gives rider a high trajetory arc off the wake while maintaining a smooth flowing transition from the mid section to the tail.
• Double Concave, Quad V Hull Design – D-I-S-C hull through center into deep double concaved quad V out the tail – D-I-S-C for softer landings with no speed loss – Concaves w/quad V for extra lift and faster rail to rail action
• Winged Scalloped Tail Outline – Full Shape with Release at Rail Wings – Allows rider to shorten the arc of his turn off the wing for slaying
• Deep Molded Long Base Side Fins with Cutaway Trailing Edge – Long base for superior hold at speed, cutaway tailing edge for quicker release off the wake
• Shallow Molded Long Base Side Fins with Cutaway Trailing Edge – Blades control water flow through inside concave V for more control
• Centerline Single Vent Along V at the Tip – Detaches water flow across centerline at end of board for increased speed
• Low Volume Rails with Reduced Area at Ends – Faster on edge with more hold.. Rail flex at end for more drive out of turns

• Special Features – Thinner profile for less added weight/ sharp bevel from tip to tail for the quickest in edge response. Artwork – screened UV clear top/ neon color inks/ hello my name is sticker.
• Rocker and Base Features – Continuous hybrid: (a combination of continuous and 3-stage) Living somewhere between a continuous and 3-stage rocker, the Ronix Arcade By Bill carries enough pop to get you well into the flats and the ability to generate all the speed you need to soar. Simple bottom shape designed to land with more forward momentum
• Construction – Compression molded foam makes for a lighter, more forgiving ride.
• Rails/Edges – Fuller center rail rides higher in the water – the sharper rail in the tail area gives extra grip up the wake

BT’s completely redesigned Vinyl now features dual level construction delivering the features and durability of a compression molded skate and the feel and pop of traditional wood decks. The bottom deck features a wider profile to generate great pop off the wake and the subtle concave top deck helps accommodate a bigger foot. Throw in a new blended 3 Stage rocker line and dual tip/tail channels and you have a skate built for performance.

Features

• 9 ply Top Deck
• Griptape Top
• Composite Bushings
• Compression Molded Base
• Wide Overall Profile
• Blended 3-Stage Rocker
• Dual tip/Tail Channels
• Layered Glass
• Fins: 2 – Shank

Just as the Natural incorporated everything good about the Player and made it better, the Decade builds on the Natural. Featuring a wider profile tip-to-tail, the next generation DELTA base, refined molded fins and the biggest rolled edge in our line, the Decade provides catch-free edge response with more pop than ever before.

CWB Transcend Wakeboard 2009: Why drastically change a shape that is loved by most everyone? CWB didn’t, they just made it better. New fin technology combined with an updated shape have created the best CWB Transcend wakeboard yet. The result is a surfy smooth feel that is very poppy off the wake and has the softest landing ever. Ride it and see for yourself.

• Rocker and Base Features – Subtle 3-Stage rocker. This board has the deepest center spine that runs the complete length of the board. The spine not only breaks the water to stomp landings, but creates an edge-to-edge response that is lightning fast.
• Construction – Closed cell foam, uni-directional carbon strip in insert area, bi-directional glass wrap, full length ABS insert strip.
• Special features – Adjustable fins: You are able to make the molded fins longer by bolting on extensions which changes the way the board releases from the wake. The molded fins have been sharpened to reduce drag and hold a stronger edge. CWB also widened the board by a quarter inch, adding surface area for more speed and increased pop off the wake.